Produces 2X the current density of a tubular cell design, many times at lower voltage levels.
Since 2006 Anolyte Cell Resources has been exclusively producing the THINCELL electrocoating anode. That's almost 20 years of covering a wide variety of components around the world. Technology that keeps its edge.
Curved Anodes versus a ThinCell Anode
Out lasts and out performs the competition
Discover our cutting-edge ThinCell anodes and solutions for efficient energy applications.​ Obtain higher film build at lower voltages.​ 100% effective Anode area is achieved in your production.
ThinCell Anodes come in many custom
sizes.
The Anode material can be Stainless or MMO exotic composition.
​
Typically one ThinCell replaces 2 of the 2" tubular cell design.
​
-
Fully Submersible
-
Sealed Low Pressure Cell
-
No seams to leak
-
No gaskets to replace
-
2x the power of a tube cell
-
100% anode efficiency
-
No maintenance required
-
1.75" thick provides more space
-
Designed with impact protection
-
High efficiency circulation
-
100% membrane efficiency
-
Engineered for long life
The compact and light design allows your technician to easily install and remove the ThinCell.
​
The thin design allows more product into the tank. Larger product in the tank.
​
Fewer collisions with the cell.
​
Less impact damage with the ThinCells deflecting design.
Installation can be done with one person
​
Uses existing mounting channels
​
3/8" inlet and either 1/2" or 5/8" returns
​
Power leads are hermetically sealed
​
High amp flex wire used for power leads
​
FRP grill deflect many fallen parts
​
Anolyte flow 0.5 GPM
​
10 amps/sqft maximum current draw
Automotive plants continue to replace their C-cells and old box cells designs with the ThinCell.
​
The ThinCell is a fully maintenance free design. There are no gaskets to leak.
The ThinCell is designed to operate like a LED light bulb. Connect the cell and let it run until the cell wears out.
The clear back insulator allow the cells condition to be observed with a flashlight and visual inspection.
Uses up to 10% less voltage than tubular cells
​​
Easy condition inspections through the clear back panel.​
​
100% of the anode area is providing efficient power transference into the bath.
No rotating the anodes to keep painting
Plug and Play design eases installation
ThinCells can be mixed in with older tubular cells while converting over the technology.
More anode area in you tank
capable of 10 amps/sqft
Custom made cells for your tank
Achieve the coating demanded by industry
Converting over is easy
If the existing cells in your system are Box or C-cell, ACR offers conversion kits and systems to make the change over easy.
​
Below is a box cell conversion kit.
One box cell is replaced with three ThinCell anodes. This conversion eliminated the maintenance required to keep the system operational. Issues that have been remedied include leaking, pH issues, rebuilding, excessive dirt in the paint, high DC voltage levels, low current output, replacing and rebuilding from failures, and low film build.
Vision
Our Mission
Anolyte Cell Resources is committed to providing high-quality anodes cells and electrocoating solutions. Our products are designed to meet the evolving needs of energy applications in various industries, ensuring reliable performance and durability.
At Anolyte Cell Resources, we focus on innovation and sustainability to drive positive change in the Ecoating sector. Our team of experts is dedicated to delivering exceptional products and services that contribute to a greener and more efficient future.