AutoCell Specs
*Replace "C" cells with up to 2 to 1
ratio.
*FRP Construction
*Disposable design
*Leak proof design
*Light weight design 50-90 lbs
*AMI 7001S membrane
*Stainless Steel Anode 7 Ga.
*Voltage rating = 600 Vdc
*Current Density=Amps 10 amps/sqft
*Anolyte requirements= 0.1 gpm/vft

Typically Priced from $1200 to
$1900.00
Compared to $1900-$3500 "C" cells
and inefficient tube cells
*No leakage or rebuilding*
One year warranty
THE AUTO CELL HAS POLYPROPYLENE
ANOLYTE FITTINGS   3/8" INLET AND 5/8"
OUTLET POWER LEAD #4 THHN and other
upgrades available as optional equiped
AutoCell Manual
Click link below for the
AutoCell spec sheet
Effective lengths up to 113" Overall length of
10 feet
New for 2017 GENERATION 3 AutoCell.
ThinCell series with an attitude :)
FRP horizontal and
vertical reinforcement rails
keep the membrane stable
FRP is maintained within
the side rails without
increase the thickness of
the cell
1) Stainless steel hardware attaching the 1/4" Red
FRP header that is used to install and remove the
AutoCell.

2) Polypropylene 3/8" inlet fitting and 5/8" return
fitting.

3) Power Cable #4 THHN rated at 85 amps
continuo
us Standard. Optional Flexible
multi-strand
100 amps continuous.

4) Mounting in the tank using your existing
hangers or ACR can provide custom hangers to
meet your needs.

The AutoCell can be installed side by side and
flush with the tank wall.

Fully encapsulated composition means no leaks
from bolting the cell together, no maintenance,
no rebuilding, install and run without changing
your existing system.

The back of the cell has a transparent insulating
plastic sheet for quick visual inspection of the
anode.
Additional FRP stringers are
standard in all AutoCell anodes.
These cells are 96"
effective and 113"
overall
length and are used at
a major automotive
assembly plant,
replacing existing "C"
cells
931-854-9383